24 Volt 2.0 Amp Battery Charger (XLR)
The 24 Volt 2.0 Amp battery charger is manufactured by UPG, and comes standard with the 3-Pin series XLR plug. This charger is meant for use with SLA batteries that have a rating of 7 - 20 amp hours. The 24 Volt 2.0 amp battery charger features an LED status indication system that allows you to visually monitor your batteries state of charge.
24 Volt 2.0 Amp Battery Charger Specifics:
- For Use With: 24 volt electric / mobility scooters equipped with an offboard female XLR socket
- Type of Charger: 3 - Stage Switch Mode SLA Charger
- Charging Current: 2.0 Amp
The 24 Volt 2.0 Amp battery charger is manufactured by UPG, and comes standard with the 3-Pin series XLR plug. This charger is meant for use with SLA batteries that have a rating of 7 - 20 amp hours. The 24 Volt 2.0 amp battery charger features an LED status indication system that allows you to visually monitor your batteries state of charge.
| Input Voltage | 100VAC - 240VAC |
| Input Frequency | 50Hz - 60Hz |
| Output Voltage | Bulk Charge: 29.4VDC +/- 0.5VDC Float Charge: 27.4VDC +/- 0.5VDC |
| Output Current | Bulk Charge: 2A +/- 0.2A Float Charge: (<) 0.5A |
| Over-Voltage Protection | (>) DC 30V |
| Over-Current Protection | (>) DC 3.5A |
| Low Voltage Turn-On | (>) 16VDC + 2V |
| Input Power (Watts) | (<) 82 Watts |
| Input Standby Power (Watts) | (<) 5 Watts |
| Efficiency | 80% at Full Load |
| Battery Size Range | 7 AH - 20 AH |
| Dielectric Withstand Voltage | AC 3.75KV for 1 min. @ 10mA, Leakage |
| Operating Temperature | 0°C~+40°C |
| Storage Temperature | -20° C~+60°C |
| Housing Protection | IP60 |
| Connector | 3 Pin D (XLR), Pin 1 (+) / Pin 2 & 3 (Ground) |
| Standards | UL1012, CUL, CE, CB, GS, EN60335, C-Tick, FCC Part 15-Class B, SAA, CEC |
| Weight | 1 LBS |
