Features of the NOCO G7200 Charger Video Breakdown

NOCO has released the new 2.0 version of the G7200 battery charger earlier this year and we love it - plain and simple. The 2.0 version of the G7200 NOCO battery charger is still a microprocessor controlled portable battery charger and maintainer capable of charging both 12 and 24 volt battery applications - but it now packs a few more essential features that we have outlined below:

Dedicated 12V Repair Mode:

The 12V repair is an advanced battery recovery mode for repairing and storing old, idle, damaged, stratified or sulfated batteries. The most common situation for a damaged battery is storage or non-use where it was kept at a low state-of-charge and/or never given the opportunity to receive a full charge, which leads to battery sulfation and stratification. Both battery sulfating and stratification will artificially raise the open circuit voltage of the battery, causing the battery to appear fully charged, while providing low capacity. For optimal results, take the 12-volt battery through a full charge cycle, bringing the battery to full charge, before using this mode. The 12V repair mode can take up to four hours to complete the recovery process and will return to Standby when completed.

12V Lithium Mode:

This is a welcomed new addition to a lot of the G series NOCO chargers - the ability to charge Lithium batteries. The 12V lithium charge mode is designed for 12-volt lithium-ion batteries only, including lithium iron phosphate.

12V AGM+ Mode:

The 12V AGM+ mode is designed for a new style of AGM batteries commonly referred to as ‘advanced’ AGM batteries. This is a new technology typically found in many start and stop micro-hybrid vehicles. Pure lead AGM batteries such as Northstar, a select few Optima, and Odyssey batteries fall into this category.

The V2.0 NOCO G7200 series charger still packs the same charging power and voltage capabilities as the first version did. In case you’re new to the G7200 unit we have listed them below:

  • Able to charge both 12 and 24 volt batteries
    • 12V Charge Rate - 7.2 amps
    • 24V Charge Rate - 3.6 amps
  • Able to charge flooded, AGM, GEL, and now lithium batteries
  • Microprocessor controlled - you can leave this on a battery indefinitely and it will never harm the battery
What’s in the Box:
  • Battery Charger
  • Quick Disconnect Battery Clamps
  • Quick Disconnect Eyelet Terminals
  • Mounting Screws
  • Instruction Manuals