Sold out
  • Free Shipping

    Orders $75 & Up

  • 30-day Money Back

    Guarantee*

  • 100% Secure Online Shopping

    SSL - Verified Merchant

CSB UPS12580-F2 12V 580W High Rate AGM UPS Battery

$30.95
SKU: UPS12580F2
Availability: Shipping Lead Time is 24 - 48 Hours
Shipping: Free shipping on orders $75 and up
Voltage: 12
Capacity: 10 AH
Chemistry: AGM
Terminal: F2
Features: UPS Series
CSB UPS12580-F2 12V 580W High Rate AGM UPS Battery
CSB UPS12580-F2 12V 580W High Rate AGM UPS Battery
$30.95

Out of stock

CSB UPS12580 F2 Battery - 12V UPS Series VRLA, 580 W at 5 Minutes

The UPS12580 F2 delivers 580 watts per unit over 5 minutes to 9.6 volts at 77°F, as listed in CSB's extended discharge table. It shares the 5.94 by 2.55 by 3.88 inch case of the HR1234W and carries the same F2 Faston terminals, but at 6.24 lbs it outweighs the 5.51 lb HR1234W. When the transfer window is short and the draw is heavy, this is the higher-output option in that case.

Warranty

Warranty. CSB's term on the UPS series is 1 year. Design life is a separate figure: up to 5 years in standby service at 77°F. Terms are confirmed in writing with your quote.

Output at 5 and 15 Minutes

580 W per unit, 5 minutes
To 9.6 volts per battery, from CSB's extended discharge table. At the 15-minute rate it delivers 43.5 watts per cell to 1.67 volts per cell, against 34.3 on the HR1234W.
11.8 milliohms internal resistance
Against about 19 milliohms on the HR1234W.
Extended storage rating
Up to 6 months on the shelf at 77°F, and up to 10 months with an equalization charge, per CSB's own figures.
  • Sealed VRLA-AGM design - recombination CSB rates up to 99%, maintenance-free.
  • UL1973 Listed (MH66728), UL1989 Recognized (MH14533), IEC 61056-1/2:2012 - as printed on the CSB UPS12580 datasheet.
  • 877 W per battery for 2 minutes to 1.67 volts per cell - the constant-power table covers windows from 2 to 90 minutes for real sizing.

Technical Specifications

CSB UPS12580 F2 Specifications
Part NumberUPS12580 F2 (also searched as UPS 12580 F2, UPS12580F2, CSB UPS12580)
Battery TypeVRLA-AGM, UPS series high rate, top terminal
Nominal Voltage12V
Power Rating, 5-minute (to 9.6 V)580 W per unit to 9.6 V (1.60 VPC) at 77°F
Power Rating, 5-minute (to 1.67 VPC)94.17 watts per cell (565 W per battery)
Power Rating, 15-minute43.50 watts per cell to 1.67 VPC (261 W per battery)
Max Discharge Current130 A (5 seconds)
Short Circuit Current575 A
Internal ResistanceApprox. 11.8 milliohms
Terminal TypeF2 Faston tab, 0.250 inch
Length5.94 inches (150.9 mm)
Width2.55 inches (64.8 mm)
Height3.88 inches (98.6 mm)
Weight6.24 lbs (2.83 kg)
ContainerABS (UL 94-HB); flame-retardant 94-V0 build available on request
Operating TemperatureDischarge -15°C to +50°C; charge and storage -15°C to +40°C
Float Charging Voltage13.5 to 13.8 Vdc per battery at 77°F
Country of OriginVietnam
Design LifeUp to 5 years standby at 77°F (CSB)
Warranty1 year (CSB)
Technical Documentation

Where This Battery Is Used

  • Full-size rack UPS trays - multi-battery rack sets where per-unit output decides how much hardware rides out the outage.
  • High-density network closets - short ride-through windows with generators or transfer switches behind them.
  • Retrofit power upgrades - trays built for this footprint that need more delivery without new hardware.

Ordering and Shipping

Parcel carrier for single units and small sets at 6.24 lbs each; tray and pallet quantities move as LTL freight. Send the quantity, your delivery ZIP and your requested-by date, and a specialist returns a written quote with volume pricing in 24 to 48 hours.

Frequently Asked Questions

Why does the 580 W figure use 5 minutes instead of 15?

The 580 W figure comes from CSB's extended discharge table, which lists the 5-minute discharge to 9.6 volts per battery (1.60 volts per cell). The datasheet linked above rates per cell to 1.67 volts: 94.17 watts at 5 minutes and 43.5 at 15, so the battery can be compared directly against 15-minute-rated models when a tray spec calls for it.

UPS12580 F2 or HR1234W F2 in the same footprint?

The cases match to the millimeter, so the tray takes either. The UPS12580 carries about 27 percent more output than the HR1234W F2 at the 15-minute rate (43.5 against 34.3 watts per cell) and a heavier plate set, and it costs accordingly. Replacing like for like keeps the string balanced, so match the series already in the tray; step up to the UPS12580 only when the whole set changes together and the load has grown into it.

Should I replace one battery or the whole tray?

The whole tray, almost always. UPS batteries age together under identical float and temperature. The exception is a documented single-unit failure in a young set. If budget forces a partial swap, tell us the set's age and we will give you a straight recommendation rather than sell you one battery twice.

What does the 130 A rating cover?

CSB prints it as 130 A for 5 seconds, a burst figure. For sizing, use the constant-power table, which runs from 2 to 90 minutes, and send us the load and the window if you want it worked through.

The full CSB range in one placeGP, HR, UPS, XHRL, TPL and EVX series, sorted by the duty they were built for.
Get the UPS12580 F2 priced for your trays

Send the quantity, your delivery ZIP and your requested-by date. A specialist confirms availability, the warranty term, volume pricing and shipping in writing, with no obligation to buy.

Call 1-877-775-4381  ·  battery specialists, not a call center

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov (State of California only).

Customer Reviews

Customers Also Viewed