• Free Shipping

    Orders $75 & Up

  • 30-day Money Back

    Guarantee*

  • 100% Secure Online Shopping

    SSL - Verified Merchant

CSB HR12120WFR 12V High Rate AGM VRLA Battery for UPS Applications

$109.95
SKU: HR12120W
Availability: Request Quote For Availability
Shipping: Free shipping on orders $75 and up
Voltage: 12
Capacity: 30 Ah (20-hour rate, CSB price list); 123 W per cell (15-min to 1.67 VPC at 25C)
Chemistry: AGM VRLA, pure lead construction
Terminal: I1 recessed threaded insert, M5 bolt, 26.4 +/- 5.3 lbf-in
Features: High rate series, group M26, flame retardant case standard
Dimensions: 6.54 x 4.92 x 6.89 in (L x W x H)
Design Life: Up to 5 years standby at 25C; Eurobat 20C 3 to 5 years
CSB HR12120WFR 12V High Rate AGM VRLA Battery for UPS Applications

CSB HR12120WFR 12V High Rate AGM VRLA Battery for UPS Applications

$109.95
Adding to cart… The item has been added

CSB HR12120WFR Battery - 12V 123W Per Cell High Rate AGM

The HR12120WFR is the top of CSB's High Rate line, and the figure that decides whether it carries your cabinet through a transfer is 123 watts per cell at the 15 minute rate to 1.67 volts per cell at 25°C, which is 738 watts across the block. Read that against the part number, because the 120 on the label is a nominal and the measured result comes in 2.50 percent above it. The step up from the HR1290WFR buys 33 more watts per cell, a rise of 36.67 percent, for 5.93 more pounds, a rise of 40.76 percent, so the trade is close to proportional and the case grows with it rather than the power coming free. What this size adds beyond watts is the lowest internal resistance in the range at 8.2 milliohms and the highest short circuit current at 928 amps. The block runs 20.48 lbs in a case 6.54 by 4.92 inches standing 6.89 inches tall, on a recessed I1 threaded lead alloy insert that takes an M5 bolt.

Warranty

Warranty. CSB warrants the HR High Rate series for 1 year. Design life is a separate figure: up to 5 years in standby service at 25°C (77°F), and 3 to 5 years on the Eurobat 20°C basis for standard commercial duty. Country of origin is Vietnam. Terms are confirmed in writing with your quote.

The Largest Block in the HR Range

123 watts per cell at 15 minutes
To 1.67 volts per cell at 25°C, or 738 watts across the block, with 232.17 watts per cell at the 5 minute rate for 1,393 watts.
8.2 milliohms internal resistance
The lowest published figure anywhere in the HR range, and the baseline an IEEE 1188 ohmic reading gets compared against over the life of the block.
928 amps short circuit current
The highest in the series, and the number a protective device rating has to clear before the block goes on a shelf.
  • 30 Ah at the 20 hour rate - per the CSB price list; the per-part datasheet rates this series in watts per cell rather than amp hours, so the two documents answer different questions.
  • 67.0 amps at the 15 minute rate - to 1.67 volts per cell, rising to 124 amps over 5 minutes and 88.9 amps over 10.
  • 12 amps maximum charge current - the recharge ceiling per block, and what the rectifier gets sized on across a long string.
  • 225 amps maximum discharge current - lower than the smaller HR1290WFR at 300 amps, because that limit is set by the terminal and the plate group rather than by capacity.
  • No 30 second rating is published - CSB prints a dash in that row for every part in the HR range, so a worksheet with a 30 second column has to fall back on the 5 minute figure.

Technical Specifications

CSB HR12120WFR Specifications
Part NumberHR12120WFR (also written HR 12120WFR, HR12120W and hr12120wfr; the FR denotes the flame retardant case, which the CSB price list marks standard on this part)
SeriesHR, High Rate, 12 volt top terminal
Battery TypeAGM, valve regulated lead acid (VRLA), pure lead construction
Nominal Voltage12V
Watts Per Cell, 15 Minutes123 W to 1.67 VPC at 25°C (738 W per block)
Watts Per Cell, 5 Minutes232.17 W to 1.67 VPC at 25°C (1,393 W per block)
Watts Per Cell, 30 SecondsNot published by CSB for the HR range
Capacity30 Ah at the 20 hour rate (CSB price list)
Discharge Current, 15 Minutes67.0 A to 1.67 VPC at 25°C
Discharge Current, 5 Minutes124 A to 1.67 VPC at 25°C
Maximum Charge Current12 A
Maximum Discharge Current225 A
Short Circuit Current928 A
Internal Resistance8.2 milliohms
Terminal TypeI1 recessed threaded lead alloy insert to accept an M5 bolt
Terminal Torque26.4 ± 5.3 lbf-in (3.0 ± 0.6 N·m)
Length6.54 inches (166 mm)
Width4.92 inches (125 mm)
Height6.89 inches (175 mm)
Weight20.48 lbs (10.2 kg)
BCI Group SizeM26 (CSB price list)
Float Charging Voltage13.5 to 13.8 VDC per battery at 25°C (77°F)
Equalization Charging Voltage14.4 to 15.0 VDC per battery at 25°C (77°F)
Operating TemperatureNominal 25°C (77°F); discharge -15°C to 50°C (5°F to 122°F); charge and storage -15°C to 40°C (5°F to 104°F)
Self DischargeLess than 10 percent after 90 days at 25°C, storable up to 6 months at that temperature; a full recharge is required before the block goes into service
Container MaterialABS (UL 94-HB) on the base part; the flame retardant 94-V0 case is what the FR build supplies, and the CSB price list marks it standard on this part number
StandardsIEC 61056-1/2:2012; UL1973 Listed (MH66728); UL1989 Recognized (MH14533); TUV NORD to ISO 9001:2015
Design LifeUp to 5 years in standby service at 25°C; 3 to 5 years on the Eurobat 20°C basis, standard commercial
Warranty1 year (CSB, HR High Rate series)
Country of OriginVietnam
Technical Documentation

Where This Battery Is Used

  • Larger rack and tower UPS cabinets - units past the point where a 9 Ah brick will do, sized on the 15 minute column to cover a transfer to generator.
  • Telecom and network closet backup - small strings on a threaded insert rather than a Faston tab, where the connection has to survive years of thermal cycling.
  • Medical and imaging carts - equipment that pulls hard for a short window and is judged on what the bank delivers in the first fifteen minutes.

Ordering and Freight

At 20.48 lbs the block ships by parcel carrier in small counts; a full tray set palletizes and moves LTL. Sets going freight ship pre-paid to a commercial address, and a residential or limited-access delivery adds $100, the liftgate and access charge the carrier passes through. Send the block count, your delivery ZIP and the date it has to be on site, and a specialist returns volume pricing, lead time and freight in writing in 24 to 48 hours.

Frequently Asked Questions

Why does the smaller HR1290WFR carry a higher discharge current limit?

Because maximum discharge current is set by the terminal and the plate group, not by how much energy the block holds. CSB rates the HR1290WFR at 300 amps and this larger part at 225. The figures that do scale with size are the ones that describe sustained output: 123 watts per cell against 90.0, 928 amps of short circuit current against 836, and 8.2 milliohms of internal resistance against 9.9. Size a string on the watts column and check the discharge limit separately against your worst case inrush.

What does the 120 in the part number stand for?

A nominal watts-per-cell figure at the 15 minute rate. CSB's datasheet measures 123 watts per cell to 1.67 volts per cell at 25°C, so the label sits 2.50 percent under the block. That pattern holds across the whole HR range and it never runs the other way: the 1221W measures 25.0 against a 21 label, the 1224W measures 27.0 against 24, the 1251W measures 53.3 against 51, and the 1290W lands exactly on 90.0. Size from the datasheet column and the badge will not flatter the battery.

Can this replace a flooded or a general purpose block of the same amp hour rating?

Amp hours alone will mislead you here. A 30 Ah general purpose AGM is built to hand back its capacity over hours, while this plate design is built to hand back 738 watts in fifteen minutes and then sit on float for years. Swapping a high rate block in where a general purpose one sits costs nothing in performance. Going the other direction shortens the runtime you get at UPS discharge rates, often by a wide margin. Send the load and the transfer window with your quote request and a specialist will confirm the substitution in writing.

Is the flame retardant case standard on this part?

Yes on this one. CSB's datasheet describes the base container as ABS to UL 94-HB with the 94-V0 flame retardant version available on request, while the CSB price list lists this part as HR 12120WFR and marks the FR case standard. That is not true everywhere in the range; the HR1224W, for instance, carries FR as a surcharged option. Where a submittal has to cite the container rating, ask a specialist to confirm it against the build in writing rather than quoting the base datasheet line.

One size down: CSB HR1290WFR90.0 watts per cell at 15 minutes and 9.9 milliohms, at 14.55 lbs in a 7.13 by 3.00 inch case.
Sizing a high rate UPS string?

Send the transfer window you have to cover, the tray dimensions and the part number running today. A specialist works the string against the 15 minute column and quotes it with lead time in writing.

Call 1-877-775-4381  ·  battery specialists, not a call center

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov (State of California only).

Customer Reviews

Customers Also Viewed