-
Free Shipping
Orders $75 & Up
-
30-day Money Back
Guarantee*
-
100% Secure Online Shopping
SSL - Verified Merchant
NAPA 740-1876 Battery Replacement - Motobatt MB5U Sealed AGM
NAPA 740-1876 Battery Replacement - Motobatt MB5U Sealed AGM
Warranty
Open the Box, Fit the Battery
Filling was also final: once the acid went in, the old battery couldn't come back to us for exchange. It could only ship by ground, too. You can still buy a cheaper flooded 12N5-4B, and an owner who's comfortable pouring acid can run one. We no longer stock them.
- Fits 4B or 3B wiring - four Quadflex posts, two per polarity, a layout we checked on a unit against both sizes.
- Comes with terminal hardware - the brackets with their screws, plus a hex key.
Technical Specifications
| NAPA 740-1876 Replacement Battery Specifications | |
|---|---|
| Part Number | Motobatt MB5U. Replaces the NAPA 740-1876 (also searched as 740 1876 and 7401876), a 12N5-4B size battery (also searched as 12N54B and 12N5 4B). Terminal layout also suits bikes that took a 12N5-3B (12N53B, 12N5 3B) |
| Battery Type | Sealed, non-spillable AGM (absorbed glass mat), factory activated, maintenance free |
| Nominal Voltage | 12V |
| Nominal Capacity | 7Ah at the 10-hour rate (7.4Ah at the 20-hour rate) |
| Cold Cranking Amps | 90 CCA |
| Terminals | Quadflex four-post layout, two positive and two negative, with brackets, screws and hex key |
| Length | 4.72 inches (120 mm) |
| Width | 2.36 inches (60 mm) |
| Height | 5.12 inches (130 mm) |
| Weight | 5.07 lbs (2.30 kg) |
| Warranty | 1-year free replacement through High-Tech Battery Solutions |
Where This Battery Is Used
- Motorcycles listed for a NAPA 740-1876 - or for a 12N5-4B under another brand's number.
- Home garages not set up for battery acid - the MB5U arrives with none to handle.
Frequently Asked Questions
What does NAPA 740-1876 cross to?
A 12N5-4B, also written 12N54B or 12N5 4B. 740-1876 is NAPA's part number for that size; the Motobatt MB5U is the sealed AGM battery we sell in its place.
Is there any acid to handle when it arrives?
No. The box holds the battery and its terminal hardware; there's no acid pack to store or throw out. Motobatt also marks it as never needing water, so nothing gets added later.
Do I need any tools or parts beyond what's in the box?
No extra parts. A basic wrench or screwdriver usually handles the bike's own hardware, such as a cover or the hold-down strap. If the old lead ends are crusted, clean them before they go on the new posts.
Read us the label off the old battery, or name the bike, and we'll match it to the MB5U on the call.
Call 1-877-775-4381 · battery specialists, not a call centerWe list the 740-1876 number only to help you match your old battery. NAPA has no business connection to High-Tech Battery Solutions.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov (State of California only).