-
Free Shipping
Orders $75 & Up
-
30-day Money Back
Guarantee*
-
100% Secure Online Shopping
SSL - Verified Merchant
Exide 12N14-3A Battery Replacement - 12V 12Ah Sealed AGM, 210 CCA
Warranty
The Numbers, Side by Side
- Terminals match - nut and bolt, 6 mm bolts, positive on the right.
- Fits under the stock strap - the case runs a little shorter than a flooded 12N14-3A.
Technical Specifications
| Exide 12N14-3A Replacement Specifications | |
|---|---|
| Part Number | Replaces the Exide 12N14-3A (also searched as Exide 12N14 3A and 12N143A). Also replaces CB14L-A2, YB14L-A2 and 14L-A2 |
| Battery Type | Sealed AGM (absorbed glass mat), factory activated, maintenance free |
| Nominal Voltage | 12V |
| Nominal Capacity | 12Ah at the 10-hour rate |
| Cold Cranking Amps | 210 CCA |
| Terminal Type | Nut and bolt, 6 mm bolts |
| Polarity | Positive on the right, same layout as the 12N14-3A |
| Length | 5.24 inches (133 mm) |
| Width | 3.54 inches (90 mm) |
| Height | 6.46 inches (164 mm) |
| Weight | 9.70 lbs (4.4 kg) |
| Warranty | 1-year free replacement through High-Tech Battery Solutions |
Where This Battery Is Used
- Electric-start bikes on cold mornings - thick oil makes the starter work hardest, and the extra cranking amps show there.
- Bikes with heated grips or added lights - parked with them switched on, the 2Ah gap works out to roughly two hours at a 1-amp draw. If that's your habit, the flooded battery's extra capacity may suit you better.
Frequently Asked Questions
How does this compare to Exide's flooded 12N14-3A?
About 60% more cranking current and about 14% less capacity, going by the published ratings. This one is also sealed, so there's no vent hose to route and no water to add. On a bike that gets started and ridden, the cranking gap is the one you'll feel.
What is the difference between cold cranking amps and amp-hours?
Cold cranking amps measure a burst: the current a battery can deliver for a short stretch at 0F while its voltage holds up. Amp-hours measure endurance over a slow drain: this battery's 12Ah means about 1.2 amps for 10 hours. A faster drain yields fewer amp-hours, so compare ratings taken at the same rate.
Will my bike's charging system work with an AGM?
Most will, if the regulator is healthy. This battery takes its charge at 14.4 to 15.0 volts. Put a multimeter across the terminals at a fast idle: above 15.0 means the system is pushing harder than this battery is built for, so have the regulator checked first.
Read us the ratings on your current battery, and a specialist will show you how this one stacks up.
Call 1-877-775-4381 · battery specialists, not a call centerThe Exide name and its published ratings appear here only for comparison. High-Tech Battery Solutions is not affiliated with Exide.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov (State of California only).