-
Free Shipping
Orders $75 & Up
-
30-day Money Back
Guarantee*
-
100% Secure Online Shopping
SSL - Verified Merchant
Yacht 12N7-4A Battery Replacement - Motobatt MB9U Sealed AGM
Warranty
Chores the MB9U Takes Off Your List
With the MB9U in place, any cover over the battery can stay closed between charges: no cells to read, no topping up, no tube to trace.
- Install day - no acid pack, nothing to pour, no initial charge. Unbox it and fit it.
- The one job left - keep it charged when the machine sits for long stretches.
Technical Specifications
| Yacht 12N7-4A Replacement Battery Specifications | |
|---|---|
| Part Number | Motobatt MB9U. Replaces the Yacht 12N7-4A, also searched as Yacht 12N74A or Yacht 12N7 4A |
| Battery Type | Sealed, non-spillable AGM (absorbed glass mat), factory activated, maintenance free |
| Voltage | 12V |
| Capacity | 11.0Ah (10-hour rate) |
| Cold Cranking Amps | 165 CCA |
| Dimensions (L x W x H) | 5.35 x 2.99 x 5.24 in (136 x 76 x 133 mm) |
| Terminal Height | 5.48 in (139 mm) |
| Weight | 7.5 lb |
| Terminals | Quadflex four-terminal case: two positive and two negative threaded brass terminals, with two terminal brackets and four screws |
| Replaces | 12N7-4A (12N74A, 12N7 4A), per Motobatt's cross-reference |
| Warranty | 1-year free replacement through High-Tech Battery Solutions |
Where This Battery Is Used
- Motorcycles that hold a 12N7-4A - a Yacht battery or any other brand.
- 12N7-4A snowmobiles, ATVs and watercraft - all three printed on the MB9U itself.
Frequently Asked Questions
Will the MB9U clear the cover over my battery?
Usually, yes. Side by side, a 12N7-4A's case and an MB9U's (136 x 76 x 133 mm) never differ by more than a millimeter in any direction. The terminals are taller, topping out at 5.48 in. That's about 1/4 inch (6 mm) more height than a 12N7-4A gives. So if anything sits tight above the battery (strap, cover, seat pan), confirm that 1/4 inch will clear before you order.
I always topped up my old battery with water. Do I still need to?
No. The MB9U's glass mat holds every bit of its acid, and its lid has no cap to lift. Water has nowhere to go.
How do I deal with the vent hose that went to my old battery?
If your machine has one, there's no port for it on the MB9U. Tie it back clear of the terminals and anything that moves.
Name your machine and read us what's printed on the old Yacht battery. We'll work out the cover clearance together on the call.
Call 1-877-775-4381 · battery specialists, not a call centerYacht's name marks which battery the MB9U is replacing. We run our own independent shop, separate from Yacht.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov (State of California only).