-
Free Shipping
Orders $75 & Up
-
30-day Money Back
Guarantee*
-
100% Secure Online Shopping
SSL - Verified Merchant
Vive Compact MOB1029S Battery Replacement Kit - Two Origin OR-12220HR 12V 20Ah AGM Batteries
Warranty
Built for Scooter Duty
- 24V from two 12V batteries - wired in series, the pair supplies the 24 volts the MOB1029S drive system runs on
- Non-spillable - DOT and IATA certified, so it is approved for air transport
- Charging range printed on the case - 14.4 to 15.0V for cycle use, initial charge current under 6.0A
Technical Specifications
| Vive Compact MOB1029S Replacement Kit Specifications | |
|---|---|
| Part Number | Origin OR-12220HR, two per kit (also searched as OR12220HR and OR 12220HR) |
| Fits | Vive Compact MOB1029S (also searched as MOB 1029S) |
| Battery Type | Sealed lead acid, AGM, high-rate |
| Nominal Voltage | 12V per battery (24V as a pair in series) |
| Nominal Capacity | 20Ah |
| Terminal Type | Threaded insert (nut and bolt) |
| Length | 7.13 inches |
| Width | 3.01 inches |
| Height | 6.57 inches (with terminals) |
| Weight | 13.1 lbs per battery (26.2 lbs per kit) |
| Charge Voltage | Cycle use 14.4 to 15.0V, standby use 13.5 to 13.8V |
| Transport | Non-spillable, DOT and IATA certified |
| Warranty | 1-year free replacement through High-Tech Battery Solutions |
Where This Kit Is Used
- Vive Compact MOB1029S - the scooter this pair is matched to
- Other scooters and power chairs on a pair of 12V 20Ah batteries - measure your battery tray against the dimensions above before ordering
Ordering
Frequently Asked Questions
What warranty comes with this battery kit?
Each battery is covered by our one-year free replacement warranty. If one fails within the year, contact us with your order number and we send a replacement.
Why replace both batteries at the same time?
The two batteries work in series, so the weaker one sets the range for both. A new battery paired with a worn one gets dragged down to the old battery's level and wears out early.
Will the terminals fit my scooter's battery cables?
The OR-12220HR uses threaded insert terminals that take a bolt. If your cables end in ring connectors, they bolt straight on. If they end in push-on spade connectors, this battery will not work with your scooter.
How do I keep the batteries healthy when the scooter sits unused?
Charge the scooter every two to three months while it is parked. Sealed lead acid batteries lose charge slowly on the shelf, and a battery left flat for a month or two starts to build sulfate on its plates, which cuts capacity and range for good.
How do I confirm this kit fits before ordering?
Check the label on your current batteries and measure the battery tray. Each OR-12220HR is 7.13 inches long, 3.01 inches wide and 6.57 inches tall. If your current batteries are a different size, send us the label details and we will confirm the right pair in 24 to 48 hours.
Send your scooter model, a photo of the battery label and your delivery ZIP. A battery specialist confirms fit and terminal type in writing in 24 to 48 hours, with no obligation to buy.
Call 1-877-775-4381 · battery specialists, not a call center