Power-Sonic PS-665 Battery - 6V 6.5AH
The Power-Sonic PS-665 battery is power-sonic's standard version of a 6v 6.5ah battery that is completely seal and maintenance free.
PowerSonic PS-665 Battery Specifications:
Voltage: 6
Capacity: 6.5 amp hour
Terminal: F1
Height (w/terminal): 4.02"
Length: 3.86"
Width: 2.20"
Weight: 2.70 Lbs
Cycle Applications: Limit initial current to 1.95A. Charge until PS-665 voltage (under charge) reaches 7.20 to 7.35 volts at 68°F (20°C). Hold at 7.20 to 7.35 volts until current drops to under 65mA. Battery is fully charged under these conditions, and charger should be disconnected or switched to “float” voltage.
“Float” or “Stand-By” Service: Hold battery across constant voltage source of 6.75 to 6.90 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.
Note: Due to the self-discharge characteristics of the PS-665 battery, it is imperative that they be charged within 6 months of storage, otherwise permanent loss of capacity might occur as a result of sulfation
Absorbent Glass Mat (AGM) technology for superior performance Valve regulated, spill proof construction allows safe operation in any position Power/volume ratio yielding unrivaled energy density Rugged impact resistant ABS case and cover (UL94-HB) Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified U.L. recognized under fi le number MH 20845
The Power Sonic PS-665 battery is covered by a one year free replacement warranty. Purchase your PS-665 battery today.
