-
Free Shipping
Orders $75 & Up
-
30-day Money Back
Guarantee*
-
100% Secure Online Shopping
SSL - Verified Merchant
Deltran Battery Tender Power Plus 10A 022-0229-DL-WH - 12V 10/6/2A Selectable Battery Charger
Deltran Battery Tender Power Plus 10A 022-0229-DL-WH - 12V 10/6/2A Selectable Battery Charger
Deltran Battery Tender Power Plus 10A 022-0229-DL-WH - 12V 10/6/2A Selectable Battery Charger
Warranty
What the 022-0229 Did, and What Replaced It
- Reverse hook-up protection - clamp it backwards and it will not output
- 12 feet of reach - 6 ft AC cord plus 6 ft DC output lead
- Ring terminal harness and alligator clips - both included, quick-disconnect on the DC lead
- LED work lights on the housing - light on the terminals in a dark engine bay
Technical Specifications
| Deltran Battery Tender Power Plus 10A 022-0229-DL-WH Specifications | |
|---|---|
| Part Number | 022-0229-DL-WH (also searched as 022 0229 DL WH, 0220229, 022-0229; sold here as DELBT1) |
| Status | Discontinued by Deltran; replaced by 022-1006-DL-WH |
| Charger Type | Microprocessor-controlled four-step automatic charger and maintainer |
| DC Output Voltage | 12V |
| Charge Current | 10 A, 6 A or 2 A, selectable |
| Power Supply Mode | 12V at 10 A |
| AC Input | 120V AC, 50/60 Hz |
| Battery Types Supported | Flooded, AGM and gel lead-acid (no lithium profile) |
| AC Power Cord | 6 ft, 18 AWG |
| DC Output Cord | 6 ft, 16 AWG |
| Included | Ring terminal harness, alligator clip harness |
| Dimensions | 2.5 x 5 x 10 inches |
| Protections | Reverse hook-up protection |
| Warranty | Not published for remaining units; confirmed with your order |
Ordering and Shipping
Frequently Asked Questions
Is the Battery Tender 022-0229 still available?
Deltran has ended production. We sell remaining units while they last, and after that the answer is the 022-1006 Power Tender 10A Multi-Chemistry, which we keep in stock.
What is the difference between the 022-0229 and the 022-1006?
Both deliver 10 amps at 12 volts. The 022-0229 has 10, 6 and 2 amp settings plus a power supply mode and charges lead-acid only. The 022-1006 has 10 and 2 amp settings, adds a LiFePO4 lithium profile, and is sealed to IP67 so it can live on a boat or in an outdoor enclosure. The newer unit also costs less.
Does the Power Plus 10A charge lithium batteries?
No. Its profiles are built for flooded, AGM and gel lead-acid batteries. If you own a LiFePO4 battery or plan to switch to one, buy the 022-1006 instead; its lithium setting uses the higher absorption voltage that chemistry needs.
What does the power supply setting do?
It turns the charger into a steady 12 volt, 10 amp source. Clip it to the vehicle's cables while the battery is out and the settings that normally reset during a swap stay put.
Send us the vehicle and the battery. A battery specialist confirms which charger fits, and what warranty applies, in writing in 24 to 48 hours, with no obligation to buy.
Call 1-877-775-4381 · battery specialists, not a call center