-
Free Shipping
Orders $75 & Up
-
30-day Money Back
Guarantee*
-
100% Secure Online Shopping
SSL - Verified Merchant
Deka Unigy 12AVR130 Battery
Deka Unigy 12AVR130 Battery
Deka Unigy 12AVR130 Battery - 12V 125 Ah Top Terminal Telecom AGM
Warranty
Why the 12AVR130 Is the Line's Pivot
- IPF plate forming - each plate individually formed, which underwrites the guaranteed 100 percent initial string capacity when tested to IEEE 1188.
- Sealed and tested construction - heat-sealed case and cover, epoxy-sealed posts, and self-sealing flame-arresting valves, each 100 percent factory tested.
- Standards on the flyer - designed to meet GR-4228, meets or exceeds IEEE recommended practices, UL recognition, UL 1973 certification for energy storage.
- Outline drawing published - East Penn's flyer carries the full dimensioned battery outline, useful when a tray is being fabricated rather than bought.
- Charge current window - 23.6 amps maximum and 7.1 amps minimum per block, from the Unigy I installation manual.
Technical Specifications
| Deka Unigy 12AVR130 Specifications | |
|---|---|
| Part Number | 12AVR130 (also searched as 12AVR 130, deka 12avr130, unigy 12avr130) |
| Battery Type | AGM VRLA with IPF plate technology, top terminal, telecom float service |
| Nominal Voltage | 12V |
| Nominal Capacity | 125 Ah at the 8-hour rate to 1.75 VPC at 77°F (15.6 A for 8 hours) |
| Discharge, 1-hour rate | 89.5 A to 1.75 VPC |
| Discharge, 4-hour rate | 28.5 A to 1.75 VPC |
| Discharge, 20-hour rate | 6.7 A to 1.75 VPC |
| Discharge Current Limits | 1.4 A minimum, 369 A maximum to 10.50V (Unigy I manual, Form 0902) |
| Positive Plate | Greater than 98% pure lead, tin-calcium alloy |
| Negative Plate | Pure lead, calcium alloy |
| Terminal Type | Top access, 1/4-20 threaded insert, epoxy-sealed posts |
| Length | 13.46 inches (341.9 mm) |
| Width | 6.84 inches (173.7 mm) |
| Height | 11.21 inches (284.7 mm) |
| Weight | 97 lbs (44 kg) |
| Float Charging Voltage | 13.50V per battery ±0.5% at 77°F (range 13.42V to 13.57V) |
| Charge Current | 23.6 A maximum, 7.1 A minimum (Unigy I manual, Form 0902) |
| Case Material | Flame-retardant polypropylene, UL 94 V-0, >28% limiting oxygen index |
| Valves | Low positive pressure, self-sealing, flame arrestor |
| Standards | GR-4228 (designed to meet); IEEE recommended practices; UL recognition; UL 1973 |
| Design Life | 10 years in float applications at 77°F (East Penn) |
| Warranty | 4 years (East Penn, Unigy I upper tier on capacity, Form 0985) |
| Minimum Order | 4 units |
Where This Battery Is Used
- 48V central office and hub-site strings - four blocks in series where the reserve requirement runs past 100 Ah and the rack is built for top-post service.
- Top-terminal replacements at capacity - swapping out a tired 120 to 130 Ah top-post block without re-cabling the tray.
- Long-duration float loads - installs sized in ampere-hours over eight hours or more, on a maintained float.
Ordering and Freight
Frequently Asked Questions
How does a top-terminal block get the 4-year warranty?
Through capacity. East Penn's Form 0985 has two routes onto the 4-year tier: a front-access terminal, or a rating of 100 ampere-hours or more at the 8-hour rate. The 12AVR130 takes the second route at 125 Ah. The smaller top-terminal blocks in the line, the 12AVR75, 12AVR90 and 12AVR100, sit under 100 Ah and carry the 1-year term. Terms travel with your written quote.
Is the 12AVR130 rated 130 Ah or 125 Ah?
125 ampere-hours at the 8-hour rate to 1.75 volts per cell at 77°F, on East Penn's Form 0982. The 130 is the model designation. Size the string on 125 and the reserve time will match the discharge table; size it on 130 and a marginal site comes up short.
What is the top-terminal alternative to the front-access 12AVR145ET?
This block. The 12AVR145ET gives 145 Ah in a long, narrow front-access case for aisle service; the 12AVR130 gives 125 Ah in a shorter, deeper top-post case. Both are on the 4-year tier with the same 10-year design life, so the choice is the rack: top-post trays take the 12AVR130, front-access shelves take the 12AVR145ET.
How heavy is a full 48V string?
Four blocks at 97 lbs each is 388 lbs of battery on the tray before cabling. Confirm the shelf or rack rating, especially on an upper tier or in a cabinet that also carries rectifiers. A specialist can check the tray rating against the block count when the quote is prepared.
Send the quantity, your delivery ZIP and your requested-by date. A specialist confirms availability, the warranty term, volume pricing and freight in writing, with no obligation to buy.
Call 1-877-775-4381 · battery specialists, not a call centerWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov (State of California only).