null

CTEK MXS 5.0 Battery Charger - (40-206)

Write a Review
$107.95
Product Code:
C002X
Availability:
Shipping Lead Time is 24 to 48 Hours
Shipping:
Free shipping on orders $75 and up
Buy Upgrading
  • free
    shipping

    orders $75 & up

  • 30-day
    money back

    guarantee*

  • 100% secure
    online shopping

    ssl - verified merchant

CTEK MXS 5.0 Battery Charger

What To Expect from the CTEK Charger

The CTEK MXS 5.0 charger utilizes CTEK's advanced and patented eight-step charging algorithm for the best approach to battery care. This unit is a microprocessor controlled fully automatic battery charger and maintainer with a built in temperature sensor to compensate for different charging environments. This unit is extremely light weight and packs a powerfull charging punch in a small profile - perfect for someone looking for a portable charger.

 

Capabilities and Uses of the 12-Volt CTEK MXS 5.0 Charger

The CTEK MXS 5.0 Charger can be used with 12 volt lead-acid batteries(Wet/AGM).

A fully automatic 8-step SLA battery charger, this CTEK delivers select 0.8 A or 5 A to 12 V batteries from 1.2–110 Ah and is suitable for maintenance charging up to 160 Ah.

The charger is splash and dust proof, designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof.

 

CTEK MXS 5.0 Charger Features

  • 5 Year Warranty
  • Spark Proof and Reverse Polarity Protected
  • Fully Automatic, Microprocessor Controled
  • 8-Step Charging Program
  • Built-In Temperature Sensing Capabilities
  • Includes Dedicated Recondition Mode
  • Chargers Batteries From 1.2AH to 110AH, Capable of Maintaining Up to 160AH

 

 

CTEK MXS 5.0 Charger Specs & Performance

Part# 40-206
Charging Voltage: 14.4 / 14.7 / 15.8 V
Charging Current: Max 5 Amps
Type of Charger: 8 Step, Fully Auto Charging Cycle
For Use With: 12V Lead-Acid Batteries
Battery Capacity: 1.2-110Ah, up to 160 Ah for Maintenance

 

 

The CTEK MXS 5.0 is an 8-stage battery charger that uses a patented charging process to safely and effectively charge batteries. The 8 stages are:

 

Desulphation: This stage removes sulphate from the battery plates, which can improve the battery's performance and lifespan.
Soft start: This stage gradually increases the charging current to prevent the battery from being damaged.
Bulk: This stage charges the battery at a high current until it is approximately 80% charged.
Absorption: This stage charges the battery at a lower current until it is fully charged.
Analysis: This stage analyzes the battery to determine if it can hold a charge. If the battery cannot hold a charge, it may need to be replaced.
RecondITION: This stage is used to recondition deeply discharged batteries. It increases the charging voltage to create controlled gassing in the battery, which helps to mix the battery acid and restore the battery's capacity.
Float: This stage maintains the battery's voltage at a constant level.
Pulse: This stage is used to maintain the battery at a high state of charge. It sends short pulses of current to the battery to keep it topped off.

This CTEK model will work for the following brands unless a lithium battery has been installed:

 

Cars: Most cars, including both petrol and diesel models, are compatible. This includes cars from manufacturers like Ford, Toyota, Honda, BMW, Mercedes-Benz, Audi, and many more:

Audi: A3, A4, A5, A6, A7, A8, Q3, Q5, Q7
BMW: 1 Series, 2 Series, 3 Series, 4 Series, 5 Series, 6 Series, 7 Series, X1, X3, X5, X6, X7
Chevrolet: Camaro, Corvette, Silverado, Tahoe
Dodge: Challenger, Charger, Ram 1500, Ram 2500, Ram 3500
Ford: F-150, F-250, F-350, Mustang
Honda: Accord, Civic, CR-V, Pilot
Hyundai: Elantra, Sonata, Tucson, Santa Fe
Jeep: Cherokee, Grand Cherokee, Wrangler
Kia: Forte, K5, Sportage, Sorento
Lexus: ES, IS, RX, GX, LX
Mazda: 3, 6, CX-5, CX-9
Mercedes-Benz: C-Class, E-Class, S-Class, GLE, GLS
Mini: Cooper, Cooper S
Mitsubishi: Eclipse Cross, Outlander
Nissan: Altima, Maxima, Murano, Pathfinder
Porsche: 911, Cayenne, Macan
Subaru: Forester, Outback
Toyota: Camry, Corolla, Highlander, RAV4
Volkswagen: Golf, Jetta, Passat, Tiguan
Volvo: S60, XC60, XC90

 

Motorcycles: The CTEK MXS 5.0 can charge 12V motorcycle batteries, including those found in bikes from Harley Davidson, Honda, Yamaha, Suzuki, and more.3. ATVs, UTV's and off road vehicles, RVs: Recreational vehicles

Boats: Small boats with 12V batteries, including motorboats and sailboats
Lawnmowers: lawnmowers and other garden machinery
Jet Skis: Personal watercraft like jet skis

CTEK MXS 5.0 FAQS

 
How long does it take to charge a battery using the CTEK MXS 5.0?
 
The charging time for a battery using the CTEK MXS 5.0 depends on the size and condition of the battery. For instance, a 12V 20Ah battery would take around 4 hours to charge, while a fully discharged 12V, 50 Ah battery, the charging time is approximately 10 hours. However, the charging time may be longer or shorter depending on the factors mentioned above.
 
How to use CTEK battery charger?
 
To use a CTEK battery charger, follow these steps:
1. Connect the red clamp to the positive (+) terminal of the battery and the black clamp to the negative (-) terminal of the battery.
2. Plug the charger into a wall outlet.
3. Select the appropriate charging mode for your battery type.
4. Press the start button to begin charging.
5. The charger will automatically turn off when the battery is fully charged.
 
Which CTEK charger do I need?
 
The CTEK charger you need depends on the size and type of battery you are charging. CTEK chargers are available for a variety of battery types, including lead-acid, AGM, and lithium-ion batteries. CTEK chargers are also available in a variety of sizes, so you can choose the charger that is right for your needs. Check out our full line of CTEK battery chargers here!
 
Where to buy CTEK battery charger?
CTEK battery chargers can be purchased directly from us at High-Tech Battery Solutions!

 

HOW TO USE CTEK BATTERY CHARGER?

 

To use a CTEK battery charger, follow these steps:
1. Connect the red clamp to the positive (+) terminal of the battery and the black clamp to the negative (-) terminal of the battery.
2. Plug the charger into a wall outlet.
3. Select the appropriate charging mode for your battery type.
4. Press the start button to begin charging.
5. The charger will automatically turn off when the battery is fully charged.

customer reviews

Total Reviews: 12

verifired buyer

  • Jason L.

    (2/15/2023)

    This is my fourth CTEK battery charger for my three cars and lawn tractor. They are the best!

  • Tom L

    (10/28/2022)

    Great Service.

  • JP M

    (8/02/2022)

    Good quality product, works as represented.