-
Free Shipping
Orders $75 & Up
-
30-day Money Back
Guarantee*
-
100% Secure Online Shopping
SSL - Verified Merchant
AutoZone 12N7-4A Battery Replacement - Motobatt MB9U Sealed AGM
Warranty
What Changes When the 12N7-4A Comes Out
- Maintenance free - you never add water or eye a fill line, because the acid lives in the glass mat.
- In the box - two terminal brackets, their four screws and an adhesive-backed foam spacer pad.
Technical Specifications
| AutoZone 12N7-4A Replacement Battery Specifications | |
|---|---|
| Part Number | Motobatt MB9U. Replaces the AutoZone 12N7-4A, also searched as AutoZone 12N74A or AutoZone 12N7 4A |
| Battery Type | Sealed, non-spillable AGM (absorbed glass mat), factory activated, maintenance free |
| Voltage | 12V |
| Capacity | 11.0Ah (10-hour rate) |
| Cold Cranking Amps | 165 CCA |
| Dimensions (L x W x H) | 5.35 x 2.99 x 5.24 in (136 x 76 x 133 mm) |
| Terminal Height | 5.48 in (139 mm) |
| Weight | 7.5 lb |
| Terminals | Quadflex four-terminal case: two positive and two negative threaded brass terminals, with two terminal brackets and four screws |
| Replaces | 12N7-4A (12N74A, 12N7 4A), per Motobatt's cross-reference |
| Warranty | 1-year free replacement through High-Tech Battery Solutions |
Where This Battery Is Used
- Older motorcycles that take a 12N7-4A - any brand, AutoZone included.
- Snowmobiles, ATVs and watercraft that take a 12N7-4A - all three are named on the MB9U's label.
Frequently Asked Questions
Will the MB9U fit where my 12N7-4A sat?
Yes. Its case is 136 x 76 x 133 mm, within a millimeter of the 12N7-4A's footprint and case height. The terminal tops sit about 1/4 inch (6 mm) higher, at 5.48 in, so if a seat pan, cover or strap sits tight over the battery, check for that 1/4 inch of room above the terminals before ordering.
Does the MB9U need a charge before it goes in?
No. The label tells you to skip the initial charge and fit it right away. If yours has sat on a shelf, test it with a voltmeter first and give it a charge if the voltage looks low.
Why does the MB9U have four terminals?
It's Motobatt's Quadflex design: two positive terminals and two negative, so the MB9U meets your cables in either layout. Fasten the cables with the supplied brackets and screws. Before tightening, make sure each cable lands on a terminal of the same polarity it had on the old battery.
Read us the code on its label and name the machine it powered. We'll check the MB9U against both while you're on the phone.
Call 1-877-775-4381 · battery specialists, not a call centerAutoZone's name is here to match the battery you're pulling out. We're an independent battery retailer, not part of AutoZone.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov (State of California only).