-
Free Shipping
Orders $75 & Up
-
30-day Money Back
Guarantee*
-
100% Secure Online Shopping
SSL - Verified Merchant
Yamaha XS1 Battery Replacement (1970-1971) - Motobatt MB5.5U AGM
Warranty
What the MB5.5U Brings to an XS1
- Quadflex four-post case - two posts on top (red cap for positive, black for negative) and one at each end, so each lead on the XS1 finds a post of its own polarity.
- Packed with the battery - a hex key, a pair of brackets and four screws for the terminals.
Technical Specifications
| Yamaha XS1 (1970-1971) Replacement Battery Specifications | |
|---|---|
| Part Number | Motobatt MB5.5U (also written MB55U), for the Yamaha XS1 that takes a 12N5.5-3B (12N553B, 12N5.5 3B) |
| Battery Type | Sealed, non-spillable AGM (absorbed glass mat), factory activated, maintenance free |
| Voltage | 12V |
| Capacity | 7.0Ah (10-hour rate) |
| Cold Cranking Amps | 90 CCA |
| Dimensions (L x W x H) | 5.31 x 2.36 x 5.12 in (135 x 60 x 130 mm), height includes terminals |
| Weight | 5.47 lb |
| Terminals | Quadflex four-post layout, two positive and two negative, with two terminal brackets, four screws and a hex key |
| Replaces | 12N5.5-3B (12N553B, 12N5.5 3B) and 12N5.5-4A (12N554A, 12N5.5 4A), per Motobatt's cross-reference |
| Warranty | 1-year free replacement through High-Tech Battery Solutions |
Where This Battery Is Used
- Yamaha XS1, 1970 to 1971 - the 650cc bike, in the 12N5.5-3B battery size.
- XS1s back on the road after a restoration - for owners who'd rather ride than fuss over the battery.
Frequently Asked Questions
Does the MB5.5U fit where the XS1's battery goes?
Yes. A 12N5.5-3B is what the XS1 takes, and the MB5.5U matches its case size, which is 135 x 60 x 130 mm with the terminals counted in the height. If a rebuild or a previous owner changed the box, measure it against those numbers first.
Does the XS1 need a vent tube with this battery?
No. There's no vent fitting anywhere on the MB5.5U, so nothing for a tube to attach to. The old tube comes out with the flooded 12N5.5-3B and stays out.
What do I do if the original battery box is corroded?
Judge how far it has gone before the new battery goes in. Light surface corrosion cleans off, and the original box can stay. If it has eaten through the floor or the mounting tabs, repair or replace the box first, because the MB5.5U needs a solid seat.
Read us the label on the battery you pulled and tell us anything a past owner changed around the box. A specialist will go over the fit before you place the order.
Call 1-877-775-4381 · battery specialists, not a call centerYamaha and the XS1 are named so you can match this battery to your motorcycle. High-Tech Battery Solutions operates separately from Yamaha.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov (State of California only).