CTEK SmartPass Energy Management System
CTEK SmartPass (Part No. 56-676) is an energy management unit which controls and optimizes energy produced by alternators, solar cells, wind power or conventional AC/DC chargers, and distributes it to the battery banks or consumers which require energy, such as the deep cycle bank, bow thruster batteries, consumers, etc. Used together with a D250S DUAL, SmartPass provides optimal charging via CTEK’s unique staged charging cycle, which also protects your batteries. SmartPass also has an integrated ‘battery guard’ which protects deep cycle batteries from harmful total discharge and ensures that critical equipment such as radio, emergency lights and navigation systems always function. SmartPass has a temperature sensor which protects batteries against high temperatures.
CTEK SmartPass Specifications
- For Use With: 12V Lead-Acid Batteries
- Regulated Charging Current: 80 Amps
CTEK SmartPass is a fully automatic energy management system which can handle up to 80A for batteries of between 28-800Ah. The energy management system is IP65 classified (water jet and dust protected and approved for outdoor use). Suitable for all types of 12V lead-acid batteries.
CTEK SmartPass Features:
- Battery separation eliminates diodes and VSR relays
- Charging of service batteries up to 100A, which reduces recharge time
- Separation of energy-consuming equipment and service batteries during charging increasing the expected life of 12V devices such as light bulbs, LEDs and other electronics and allows the battery to be charged from the alternator at a level that minimizes recharge time [patent pending]
- Temperature protection of services batteries reduces charge current at high temperatures [patent pending]
This CTEK model will work for the following brands unless a lithium battery has been installed:
- Acura
- Audi
- BMW
- Bentley
- Buick
- Cadillac
- Chrysler
- Dodge
- Ford
- GMC
- Genesis
- Honda
- Hyundai
- Infiniti
- Jaguar
- Jeep
- Land Rover
- Lexus
- Lincoln
- Maserati
- Mazda
- Mercedes-Benz
- Nissan
- Porsche
- Ram
- Rolls-Royce
- Saab
- Subaru
- Toyota
- Volkswagen
- Volvo
Browse CTEK Charger Accessories
Integrated System: CTEK D250S Dual and CTEK SmartPass
Combining the CTEK D250S Dual and CTEK SmartPass ensures optimal battery charging.
The CTEK SmartPass manages the energy transfer through the CTEK D250S Dual, which then converts and produces the optimal voltage of 14.4V, even if the alternator only produces 14V.
Battery Watch Technology
CTEK’s built-in Battery Watch technology allows the SmartPass to make full use of the majority of energy produced (up to 95 %) and distributes the power servicing battery banks, bow thrust batteries and electrical equipment such as navigational systems. The CTEK SmartPass, properly manages and distributes power, directing energy to where it is needed most. This ensures that service batteries are protected from being deeply discharged, providing batteries with an optimal service life and reducing the frequency and need for regular traditional charging.
Protection From High Temperatures
The CTEK SmartPass has a sensor which senses the battery temperature and reduces charge current at high battery temperatures.
Simplified Installation
The CTEK SmartPass eliminates the need for units with multiple outputs. All batteries can be charged and maintained through the unit. The CTEK SmartPass converts a 110/230V charger with one output into a unit that serves both the service and starter battery.
Combining the CTEK D250S Dual and CTEK SmartPass ensures optimal battery charging.
The CTEK SmartPass manages the energy transfer through the CTEK D250S Dual, which then converts and produces the optimal voltage of 14.4V, even if the alternator only produces 14V.
Battery Watch Technology
CTEK’s built-in Battery Watch technology allows the SmartPass to make full use of the majority of energy produced (up to 95 %) and distributes the power servicing battery banks, bow thrust batteries and electrical equipment such as navigational systems. The CTEK SmartPass, properly manages and distributes power, directing energy to where it is needed most. This ensures that service batteries are protected from being deeply discharged, providing batteries with an optimal service life and reducing the frequency and need for regular traditional charging.
Protection From High Temperatures
The CTEK SmartPass has a sensor which senses the battery temperature and reduces charge current at high battery temperatures.
Simplified Installation
The CTEK SmartPass eliminates the need for units with multiple outputs. All batteries can be charged and maintained through the unit. The CTEK SmartPass converts a 110/230V charger with one output into a unit that serves both the service and starter battery.
The CTEK SmartPass (Part No. 56-676) is an energy management unit which controls and optimizes energy produced by alternators, solar cells, wind power or conventional AC/DC chargers, and distributes it to connected battery banks.
| Part No. | 56-676 |
| Charging Current | 80 Amps |
| Type of Batteries | 12V Lead-Acid Batteries |
| Battery Capacity | 75 - 800AH |
| Insulation | IP65 (splash and dust proof) |
